Draw your pattern on the glass using the inside line …
you must have at least a 1/8" gap
Cut all glass pieces … grind if necessary
Construction:
Place mosaic resist on top of pattern
Place glass in proper place on pattern
Use a razor … cut resist excess away
Oil mould and place resist with glass inside mould … resist is on bottom of mould!
Cement … When mixing your concrete or topping mix, always mix Weldbond with water… (5 to 1 ratio) 5 parts water to 1 part Weldbond. Then use this mixture as the water portion of your Premix cement.
For 16" Hexagonal mould
For 12" Circle
8 cups sand mix
6 cups sand mix
16 cups cement mix
12 cups cement mix
Mix sand mix with 5 parts water to 1 part Weldbond
Make into a thick soupy texture
If using colorant, mix in at this time
Carefully pour sand mix into mould
Spread evenly
Mix cement with 5 parts water to 1 part Weldbond
Pour into mould and smooth
Use a mallet to gently pound bottom of mould and slide …. this releases any air bubbles
